Bosch B6512 Installation Manual page 37

Control Panels
Flash pattern
Flashes once every 1 sec
3 quick flashes every 1 sec
Tab. 8.4: Heartbeat LED descriptions
Flash pattern
RX (Receive) Flashing
TX (Transmit) Flashing
Tab. 8.5: RX and TX LEDs descriptions
LINK (yellow) LED pattern
Flashing
Flashing
Tab. 8.6: Ethernet Link LEDs descriptions
Bosch Security Systems, Inc.
On Steady
Off
100Mb (green) LED pattern
Off
On Steady
On Steady
Installation Manual
Function
Normal state. Indicates normal operation state.
Communication error state. Indicates a bus communication
error. The module is not receiving commands from the
control panel.
Trouble state. Indicates a trouble condition exists.
LED trouble state. Module is not powered, or some other
trouble condition prohibits the module from controlling the
heartbeat LED.
Function
Occurs when the module receives a message over the
network connection – UPD, TCP, or DNS.
Occurs when the module sends a message over the
network connection – UPD, TCP, or DNS.
Off
Off
Off
On Steady
On Steady
IP communications | en
Function
No Ethernet link
10Base-T link
10Base-T activity
100Base-TX link
100Base-TX activity
2018.07 | 16 | F.01U.287.180
37