Sdi2 Address Information - Bosch B6512 Installation Manual

Control Panels
Panel event
Test Report - System Normal,
Expanded Status
Test Report - System Normal,
Non-expanded Status
Test Report - System Off-
normal, Expanded Status
Test Report - System Off-
normal, Non-expanded Status
Time Changed - No User
Identified
Time Changed by Receiver
Sync
Time Changed by User
Trouble
Unverified Event
User Authority level has
changed
User Passcode Tamper - Too
Many Attempts
Walk Test End
Walk Test Start
Watchdog Reset
Watchdog Reset - SDI Device
Reported identifies the
Source
1
zzz represents an SDI, or SDI2 device address value, or network trouble condition, indicated by a number (for
example, 501).
22.2.2

SDI2 address information

Notice!
All point numbers, user ID's, output numbers, and device identifier numbers are formatted as
4-digit numbers (right justified with zeros) when transmitted from the control panel in
Modem4 format.
SDI2 address
01-08
Bosch Security Systems, Inc.
Modem4 code Modem4 code
D6500 mode Bosch SIA mode
RsssE NRP & see
D6600 CIM for
Status Items
RsssE NRP
RsssE NRY & see
D6600 CIM for
Status Items
RsssE NRY
NsD07 NJT
NsD07 Nid5001JT
NsD07 NidiiiiJT
Tspppp NriaaBTpppp
Kpppp NriaaUGpppp
NsD40 NidiiiiJZiiii
NsD03 NriaJA
RsssF Nriaa/idiiiiTE
TsssF Nriaa/idiiiiTS
NsD09 NpiddddYW
NsD09 NpiddddYW
zzz data values
001-008
Installation Manual
Contact ID event
Periodic Test Report
Periodic Test Report
Periodic Test - System
Trouble Present
Periodic Test - System
Trouble Present
Time/Date Reset
Time/Date Reset
Time/Date Reset
Sensor Trouble
Cross-Zone Trouble
Local Only
Wrong Code Entry
Walk Test Mode Emd
Walk Test Mode
System Reset
System Reset
Description
SDI2 Keypad 1 through 8
Appendix | en 141
Contact ID code
1 602 00 000
1 602 00 000
1 608 00 000
1 608 00 000
1 625 00 000
1 625 00 F01
1 625 00 uuu
1 380 aa ppp
1 378 aa ppp
Local Only
1 461 aa 000
3 607 aa uuu
1 607 aa uuu
1 305 00 000
1 305 00 000
2018.07 | 16 | F.01U.287.180