Installing Memory - Dell Dimension 9200 Service Manual

Documentation
available to the operating system is less than 4 GB. Certain components within the computer require address space in the
4-GB range. Any address space reserved for these components cannot be used by computer memory.

Installing Memory

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer.
1. Follow the procedures in
2. Remove the computer cover (see
3. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
4. Press out the securing clip at each end of the memory module connector.
1 memory module connectors (4)
5. Align the notch on the bottom of the module with the crossbar in the connector.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (8 of 68) [12/9/2007 11:22:24 PM]
Before You Begin.
Removing the Computer Cover).
2 securing clip (2)