Replacing The Battery - Dell Dimension 9200 Service Manual

Hide thumbs Also See for Dimension 9200:
Table of Contents

Advertisement

Documentation
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Replace the drive panel (see
9. Replace the computer cover (see
NOTICE:
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the
computer.
10. Connect your computer and devices to their electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
11. Enter system setup (see
12. Verify that your computer works correctly by running the Dell Diagnostics (see
Battery

Replacing the Battery

CAUTION:
Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface
on the computer.
A coin-cell battery maintains computer configuration, date, and time information. The battery can last several years. If
you have to repeatedly reset time and date information after turning on the computer, replace the battery.
CAUTION:
A new battery can explode if it is incorrectly installed. Replace the battery only with the same
or equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer's instructions.
To replace the battery:
1. Enter the system setup program and record the values for all the screens (see
restore the correct settings after installing the new battery.
2. Follow the procedures in
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (45 of 68) [12/9/2007 11:22:24 PM]
Installing the Drive
Panel).
Replacing the Computer
Cover).
Setup) and select the appropriate Drive option.
Entering System
Before You
Begin.
Dell
Diagnostics).
Setup) so that you can
Entering System

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents