Adding A Second Hard Drive - Dell Dimension 9200 Service Manual

Documentation
1 power cable
9. Check all connectors to be certain that they are properly cabled and firmly seated.
10. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug the cable into
the computer.
11. Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the hard drive for instructions about installing any software required for the
operation of the hard drive.

Adding a Second Hard Drive

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a
foam pad, that will sufficiently cushion it.
1. Check the documentation for the drive to verify that it is configured for your computer.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (32 of 68) [12/9/2007 11:22:24 PM]
2 hard drive cable
Replacing the Computer Cover).