Floppy Drive - Dell Dimension 9200 Service Manual

Documentation
1 power cable
8. Check all connectors to be certain that they are properly cabled and firmly seated.
9. Replace the computer cover
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
10. Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.

Floppy Drive

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
NOTE: If you are adding a floppy drive, see
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (34 of 68) [12/9/2007 11:22:24 PM]
2 hard drive cable
(Replacing the Computer
Cover).
Installing a Floppy Drive.