Documentation
1
Media Card Reader (optional)
9. Route the USB cable through the cable routing clip.
10. Replace the drive panel (see
11. Replace the computer cover (see
CD/DVD Drive
CAUTION:
Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
If removing or installing the drive changes the drive configuration, you must reflect the changes in the BIOS. Go
NOTE:
to the "Drives" section of the BIOS and under SATA 0 through 5, set the SATA ports to the correct configuration.
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (41 of 68) [12/9/2007 11:22:24 PM]
Installing the Drive
Panel).
Replacing the Computer
Cover).
2
USB cable