Dell Dimension 9200 Service Manual page 7

Documentation
1 link integrity light
2 network adapter connector
3 network activity light
http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/about.htm (5 of 7) [12/9/2007 11:13:43 PM]
Green — A good connection exists between a 10-
●
Mbps network and the computer.
Orange — A good connection exists between a 100-
●
Mbps network and the computer.
Yellow — A good connection exists between a 1000-
●
Mbps (1-Gbps) network and the computer.
Off — The computer is not detecting a physical
●
connection to the network.
Do not plug a telephone cable into the network
NOTICE:
connector.
Use the network adapter connector to attach your computer
to a network or broadband device. Connect one end of a
network cable to either a network jack or your network or
broadband device, and then connect the other end of the
network cable to the network adapter connector on your
computer. A click indicates that the network cable has been
securely attached.
On computers with an additional network connector card,
use the connectors on the card and on the back of the
computer when setting up multiple network connections
(such as a separate intra- and extranet).
NOTE: It is recommended that you use Category 5 wiring
and connectors for your network. If you must use Category
3 wiring, force the network speed to 10 Mbps to ensure
reliable operation.
Flashes a yellow light when the computer is transmitting or
receiving network data. A high volume of network traffic
may make this light appear to be in a steady "on" state.