1. Manuals
  2. Brands
  3. Dell Manuals
  4. Desktop
  5. Dimension 9200C
  6. Service manual

Dell Dimension 9200C Service Manual

Computer
Hide thumbs Also See for Dimension 9200C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
Dell Dimension 9200C Service Manual
Dell™ Dimension™ 9200C Service Manual
Before You Begin
About Your Computer
Technical Overview
Specifications
Troubleshooting
System Setup
Removing the Computer Cover
Removing and Installing Parts
Replacing the Computer Cover
Notes, Notices, and Cautions
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
NOTICE:
A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
CAUTION:
A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and Dimension are trademarks of Dell Inc.; Intel, Pentium, Intel SpeedStep, and Celeron are
registered trademarks of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
August 2006 Rev. A00
file:///T|/htdocs/systems/dim9200C/en/SM_EN/index.htm[10/31/2012 8:07:07 AM]

Advertisement

Table of Contents
loading

Related Manuals for Dell Dimension 9200C

Summary of Contents for Dell Dimension 9200C

  • Page 1 Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and Dimension are trademarks of Dell Inc.; Intel, Pentium, Intel SpeedStep, and Celeron are registered trademarks of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.

  • Page 2: Before You Begin

    Turning Off Your Computer Before Working Inside Your Computer. You have read the safety information in your Dell™ Product Information Guide. A component can be replaced by performing the removal procedure in reverse order. Recommended Tools The procedures in this document may require the following tools:...
  • Page 3 NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some cables have a connector with locking tabs;...

  • Page 4: About Your Computer

    About Your Computer: Dell Dimension 9200C Service Manual Back to Contents Page About Your Computer Dell™ Dimension™ 9200C Service Manual Front View Back View Front View NOTE: The front panel door does not close when you are using certain Flash Media, IEEE 1394, USB, or headphone connectors.

  • Page 5: Back View

    About Your Computer: Dell Dimension 9200C Service Manual It is recommended that you use the back USB connectors for devices that typically remain connected, such as printers and keyboards. IEEE 1394 Attach high-speed serial multimedia devices, such as digital video cameras.

  • Page 6: Back Panel Connectors

    About Your Computer: Dell Dimension 9200C Service Manual 1 voltage selection switch (may not be See the safety instructions in the Product available on all computers) Information Guide for more information. 2 power connector Insert the power cable. 3 back panel connectors Plug IEEE 1394, USB and other devices into the appropriate connector.
  • Page 7 About Your Computer: Dell Dimension 9200C Service Manual network To attach your computer to a network or broadband device, connect one end adapter of a network cable to either a network jack or your network or broadband connector device. Connect the other end of the network cable to the network adapter connector on the back panel of your computer.
  • Page 8 About Your Computer: Dell Dimension 9200C Service Manual file:///T|/htdocs/systems/dim9200C/en/SM_EN/about.htm[10/31/2012 8:07:13 AM]...

  • Page 9: Technical Overview

    Technical Overview: Dell Dimension 9200C Service Manual Back to Contents Page Technical Overview Dell™ Dimension™ 9200C Service Manual Inside View of Your Computer System Board Components Power Supply DC Connector Pin Assignments Inside View of Your Computer CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
  • Page 10 Technical Overview: Dell Dimension 9200C Service Manual processor fan connector (CPUFAN) 16 modem connector (RJ11) processor connector (CPU) 17 RJ11 internal connector (RJ11INT) processor power connector 18 video connector (VGA) (POWER12V) memory module connectors (2, 4) 19 Media Card Reader connector...

  • Page 11: Jumper Settings

    Technical Overview: Dell Dimension 9200C Service Manual 10 CD/DVD connector (SATA1) 25 PCI Express x16 connector (SLOT1) 11 front panel connector (FRONT PANEL) 26 standby LED (STBYLED) 12 modem 27 password jumper (CLRPSWD) 13 power connector (POWER) 28 RTC reset jumper (CLRCMOS)

  • Page 12: Dc Power Connector P1

    Technical Overview: Dell Dimension 9200C Service Manual DC Power Connector P1 Pin Number Signal Name 18-AWG Wire +3.3 VDC Orange +3.3 VDC Orange Black +5 VDC Black +5 VDC Black POK* Gray +5 VFP Purple +12 VDC Yellow Yellow +12 VDC +3.3 VDC...

  • Page 13: Dc Power Connector P2

    Technical Overview: Dell Dimension 9200C Service Manual PS_ON* Green Black Black Black N.C. N.C. +5 VDC +5 VDC +5 VDC Black *Uses 22 AWG wire instead of 18 AWG. DC Power Connector P2 Pin Number Signal Name 18-AWG Wire Black...
  • Page 14 Technical Overview: Dell Dimension 9200C Service Manual Pin Number Signal Name 18-AWG Wire Black +5 VDC +3.3 VDC Orange Back to Contents Page file:///T|/htdocs/systems/dim9200C/en/SM_EN/techov.htm[10/31/2012 8:07:20 AM]...

  • Page 15: Specifications

    Specifications: Dell Dimension 9200C Service Manual Back to Contents Page Specifications Dell™ Dimension™ 9200C Service Manual Processor Processor types Intel® Pentium® 4, Pentium® D, Celeron® D, Intel Core™ processor Level 2 (L2) cache 1 MB for Pentium 4 5XX processors (with...
  • Page 16 Specifications: Dell Dimension 9200C Service Manual Video Type integrated Intel Graphics Media Accelerator X3000 or PCI Express x16 graphics expansion slot Audio Type Internal 7.1 channel Intel High Definition Audio (Sigmatel STAC9227) Expansion Bus Bus type PCI Express x1 and x16...
  • Page 17 Specifications: Dell Dimension 9200C Service Manual NOTE: The 10-pin header connector used for the optional Media Card Reader is populated with only nine pins for keying purposes. Audio six back panel connectors for line-in, line- out/headphone, rear surround sound, microphone, side surround sound, and...
  • Page 18 Specifications: Dell Dimension 9200C Service Manual orange light — A good connection exists between a 100-Mbps network and the computer. off (no light) — The computer is not detecting a physical connection to the network. Activity light (on integrated network...
  • Page 19 Specifications: Dell Dimension 9200C Service Manual Storage –15.2 to 10,668 m (–50 to 35,000 ft) Back to Contents Page file:///T|/htdocs/systems/dim9200C/en/SM_EN/specs.htm[10/31/2012 8:07:23 AM]...

  • Page 20: Troubleshooting

    The Quickboot feature changes the boot sequence for the current boot only. Upon restart, the computer boots according to the boot sequence specified in system setup. 4. At the Dell Diagnostics Main Menu, left-click with the mouse, or press <Tab> and then <Enter>, to select the test you want to run (see Dell Diagnostics Main Menu).

  • Page 21: System Lights

    "Contacting Dell" in your Owner's Manual for instructions on obtaining technical assistance. NOTE: The Service Tag for your computer is located at the top of each test screen. When contacting Dell support, have your Service Tag ready.

  • Page 22: Diagnostic Lights

    Plug the computer into a working electrical outlet (see "Power Problems" in normal off condition your Owner's Manual). or a possible pre- If the problem persists, contact Dell (see "Contacting Dell" in your Owner's BIOS failure has Manual). occurred. A possible processor Contact Dell (see "Contacting Dell"...
  • Page 23 (see "Resolving Software and Hardware Incompatibilities" in your Owner's Manual). 4. If the problem persists, contact Dell (see "Contacting Dell" in your Owner's Manual). Another failure has Ensure that all hard drive and CD/DVD drive cables are properly connected occurred.

  • Page 24: Beep Codes

    Troubleshooting: Dell Dimension 9200C Service Manual Beep Codes Your computer may emit a series of beeps during start-up if the monitor cannot display errors or problems. This series of beeps, called a beep code, identifies a problem. For example, beep code 1-3-1 (one possible beep code) consists of one beep, a burst of three beeps, and then one beep.

  • Page 25: Entering System Setup

    Entering System Setup 1. Turn on (or restart) your computer. 2. When the blue DELL™ logo appears, press <F2> immediately. NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure, press and release <F2>...

  • Page 26: System Setup Options

    System Setup: Dell Dimension 9200C Service Manual highlight an option. Press <Enter> to make that selection active. Options List — This field appears on the left side of the system setup window. The field is a scrollable list containing features that define the configuration of your computer, including installed hardware, power conservation, and security features.
  • Page 27 System Setup: Dell Dimension 9200C Service Manual default) Displays the controller type (SATA), the port number the drive is using, the drive ID number, capacity and link speed, and whether the drive is controlled by the BIOS. Enables or disables an ATA device (such as a CD or DVD drive). On (the default setting) enables the Drive 1 interface so that the device can be used.
  • Page 28 System Setup: Dell Dimension 9200C Service Manual Acoustic Quiet (default) — The hard drive operates at its most quiet setting. Mode Suggested — The hard drive operates at the level suggested by the drive manufacturer. Performance — The hard drive operates at its maximum speed.

  • Page 29: Boot Sequence

    System Setup: Dell Dimension 9200C Service Manual Message NOTE: Some graphics cards require that the SERR DMI message mechanism be disabled. default) Restores System Setup options to their factory defaults. Load Defaults Event Log Allows you to view the Event Log. Entries are marked R for Read and U for Unread. Mark All Entries Read puts an R to the left of all entries.

  • Page 30: Changing The Boot Sequence For The Current Boot

    About Your Computer). 2. Turn on (or restart) your computer. 3. When the DELL logo appears, press <F12> immediately. NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure, press and release <F12> in even intervals until the Boot Device Menu appears.

  • Page 31: Clearing Forgotten Passwords

    System Setup: Dell Dimension 9200C Service Manual Clearing Forgotten Passwords CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: This process erases both the system and administrator passwords.

  • Page 32: Flashing The Bios

    The BIOS may require flashing when an update is available or when replacing the system board. 1. Turn on the computer. 2. Locate the BIOS update file for your computer at support.dell.com. 3. Click Download Now to download the file.

  • Page 33: Removing The Computer Cover

    Removing the Computer Cover: Dell Dimension 9200C Service Manual Back to Contents Page Removing the Computer Cover Dell™ Dimension™ 9200C Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
  • Page 34 Removing the Computer Cover: Dell Dimension 9200C Service Manual 5. Grip the sides of the computer cover and pivot the cover up, using the bottom hinges as leverage points. 6. Lift the cover away and set it aside in a secure location.

  • Page 35: Removing And Installing Parts

    Removing and Installing Parts: Dell Dimension 9200C Service Manual Back to Contents Page Removing and Installing Parts Dell™ Dimension™ 9200C Service Manual Memory Processor Cards Modem Hard Drive Power Supply CD/DVD Drive System Board Floppy Drive (Optional) Front I/O Panel...

  • Page 36: Addressing Memory With 4-Gb Configurations

    If you remove your original memory modules from the computer during a memory upgrade, keep them separate from any new modules that you may have, even if you purchased the new modules from Dell. If possible, do not pair an original memory module with a new memory module. Otherwise, your computer may not start properly.
  • Page 37 Removing and Installing Parts: Dell Dimension 9200C Service Manual memory connector closest to processor securing clips (2) connector 3. Align the notch on the bottom of the module with the crossbar in the connector. notch crossbar memory module cutouts (2)

  • Page 38: Removing Memory

    You can do so by touching an unpainted metal surface on the computer chassis. Your Dell™ computer provides the following slots for PCI Express cards: One PCI Express x16 card slot...

  • Page 39: Installing A Pci Express Card

    Removing and Installing Parts: Dell Dimension 9200C Service Manual PCI Express x16 card PCI Express x1 card PCI Express x1 card slot PCI Express x16 card slot If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not...
  • Page 40 Removing and Installing Parts: Dell Dimension 9200C Service Manual 3. If you are installing a new card, remove the filler bracket to create a card-slot opening, then continue with step 4. If you are replacing a card that is already installed in the computer, grasp the card by its top corners, and ease it out of its connector.

  • Page 41: Removing A Pci Express Card

    Removing and Installing Parts: Dell Dimension 9200C Service Manual retention arm PCI Express card edge connector card connector NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

  • Page 42: Removing A Hard Drive

    Removing and Installing Parts: Dell Dimension 9200C Service Manual If you need a filler bracket, contact Dell. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. Filler brackets also keep dust and dirt out of your computer.

  • Page 43: Installing A Hard Drive

    Removing and Installing Parts: Dell Dimension 9200C Service Manual NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to the cables and cable connectors. 3. Lift the drive out of the computer and disconnect the power and hard-drive cables from the drive.
  • Page 44 Removing and Installing Parts: Dell Dimension 9200C Service Manual tabs (2) drive drive screw holes drive bracket 5. Connect the power cable and hard drive or SATA cable to the drive. 1 power cable 2 hard drive plastic latch 3 hard drive cable or serial ATA data cable 4 open bay 6.

  • Page 45: Removing A Cd/Dvd Drive

    Removing and Installing Parts: Dell Dimension 9200C Service Manual 9. Firmly press on the blue tab on each side of the drive until you hear a click. 10. Replace the computer cover (see Replacing the Computer Cover). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

  • Page 46: Installing A Cd/Dvd Drive

    Removing and Installing Parts: Dell Dimension 9200C Service Manual data cable power cable CD/DVD connector CD/DVD drive CD/DVD drive bracket 6. Set the drive aside in a secure location. Installing a CD/DVD Drive 1. Follow the procedures in Before You Begin.

  • Page 47: Floppy Drive (Optional)

    Removing and Installing Parts: Dell Dimension 9200C Service Manual data cable power cable CD/DVD connector 4. Connect the data cable to the CD/DVD connector on the system board. 5. Gently position the drive until it clicks into place. CD/DVD drive CD/DVD drive bracket 6.

  • Page 48: Installing A Floppy Drive

    Removing and Installing Parts: Dell Dimension 9200C Service Manual drive release latch floppy drive 5. Disconnect the floppy drive interface cable from the system board (see System Board Components). NOTE: The interface cable is held in place by the metal drive bracket and does not need to be removed from the drive.
  • Page 49 Removing and Installing Parts: Dell Dimension 9200C Service Manual 1. Follow the procedures in Before You Begin. 2. Remove the CD/DVD drive, if installed (see Removing a CD/DVD Drive). 3. Gently slide the floppy drive into place until you hear a click or feel the drive securely installed.

  • Page 50: Removing A Media Card Reader

    Removing and Installing Parts: Dell Dimension 9200C Service Manual 7. Replace the computer cover (see Replacing the Computer Cover). NOTICE: To connect a network cable, first plug the cable in to the network port or device, and then plug it in to the computer.

  • Page 51: Installing A Media Card Reader

    Removing and Installing Parts: Dell Dimension 9200C Service Manual drive release latch Media Card Reader Installing a Media Card Reader 1. Follow the procedures in Before You Begin. NOTE: If necessary, remove the Media Card Reader screws. 2. Remove the Media Card Reader from its packaging and ensure that all the screws are included.
  • Page 52 Removing and Installing Parts: Dell Dimension 9200C Service Manual 4. Connect the interface cable to the back of the Media Card Reader and to the Media Card Reader connector on the system board (see System Board Components). interface cable 5. Replace the hard drive (see Installing a Hard Drive).

  • Page 53: Removing The Heat Sink Assembly

    Removing and Installing Parts: Dell Dimension 9200C Service Manual operation. 9. Enter system setup (see Entering System Setup) and select the appropriate Drive option. Heat Sink Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

  • Page 54: Removing The Fan Assembly

    Removing and Installing Parts: Dell Dimension 9200C Service Manual NOTICE: Ensure that the heat sink is correctly seated and secure. 3. Replace the CD/DVD drive (see Installing a CD/DVD Drive). 4. Replace the computer cover (see Replacing the Computer Cover).

  • Page 55: Installing The Fan Assembly

    Drive). NOTICE: If you are installing a processor upgrade kit from Dell, discard the original heat sink. If you are not installing a processor upgrade kit from Dell, reuse the original heat sink when you install your new processor. 3. Remove the heat sink assembly (see Removing the Heat Sink Assembly).

  • Page 56: Installing The Processor

    Removing and Installing Parts: Dell Dimension 9200C Service Manual processor cover processor processor socket release lever 5. Open the processor cover, and then carefully remove the processor from the socket. Leave the release lever extended in the release position so that the socket is ready for the new processor.
  • Page 57 NOTICE: If you are not installing a processor upgrade kit from Dell, reuse the original heat sink assembly when you replace the processor. If you installed a processor replacement kit from Dell, return the original heat sink assembly and processor to Dell in the same package in which your replacement kit was received.

  • Page 58: Replacing The Modem

    Removing and Installing Parts: Dell Dimension 9200C Service Manual Modem CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: Before you remove or install the modem, make sure to disconnect all telephone and network cables from your computer.

  • Page 59: Removing The Power Supply

    Removing and Installing Parts: Dell Dimension 9200C Service Manual (RJ11INT) modem cable 4. Install the new modem: a. Connect the T-shaped connector of the modem cable to the modem. b. Align the modem with the screw holes and press the modem into its connector on the system board (see...

  • Page 60: Replacing The Power Supply

    Removing and Installing Parts: Dell Dimension 9200C Service Manual power supply screws (3) 5. Slide the power supply approximately 1 inch toward the front of the computer. 6. Carefully lift the power supply out of the computer. Replacing the Power Supply 1.

  • Page 61: Replacing The System Board

    Removing and Installing Parts: Dell Dimension 9200C Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer.

  • Page 62: Removing The Front I/O Panel

    Removing and Installing Parts: Dell Dimension 9200C Service Manual NOTE: Some components and connectors on the replacement system board may be in different locations from corresponding connectors on the existing system board. 3. Transfer components from the existing system board to the replacement system board: a.

  • Page 63: Installing The I/O Panel

    Removing and Installing Parts: Dell Dimension 9200C Service Manual screw front I/O panel 8. Remove the Diagnostic LED card. a. Remove the cable connected to the card. b. Press the Diagnostic LED card case release lever and slide the case towards the bottom of the chassis to release the card case from the chassis.

  • Page 64: Replacing The Battery

    Removing and Installing Parts: Dell Dimension 9200C Service Manual Battery CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components.

  • Page 65: Front Panel

    Removing and Installing Parts: Dell Dimension 9200C Service Manual 9. Connect your computer and devices to electrical outlets, and then turn them on. 10. Enter system setup (see Entering System Setup) and restore the settings you recorded in step 11. Properly dispose of the old battery.
  • Page 66 Removing and Installing Parts: Dell Dimension 9200C Service Manual release button panel front panel 12. Grasp the edge of the front panel lying against your work surface, then carefully pry it out and away from the chassis. release tabs 13. Lift up on the front panel to release the top two tabs that attach it to the computer chassis.

  • Page 67: Replacing The Computer Cover

    Replacing the Computer Cover: Dell Dimension 9200C Service Manual Back to Contents Page Replacing the Computer Cover Dell™ Dimension™ 9200C Service Manual CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

Table of Contents