Table of Contents
Advertisement
Intergrated lighting contol
The tricycle can be fitted with a different
headlight. This lighting is connected to the
electrical system.
Adjust the angle of the headlamp. Make sure
that the centre of the beam is approximately ten
meters in front of the bike.
The headlight switches automatically on when
the electrical system is activated. You can
manually activate and deactivate the lights with
a short press of the on/off button on the display.
If the electrical system is switched off, the
lighting turns off automatically.
Once the battery is low, the motor will no longer provide support for cycling. The
integrated lighting continues to work. However on the remaining charge.
The USB port, which is located on the headlight, has no function.
Flashing light system
To use the flashing lights press the
switch [A] to the left or right.
[A]
B
If you want to switch off the
flashing light system, put the
switch in the middle position.
User manual | Fun2Go and Funtrain 18.06
28
Advertisement
Table of Contents
