Table of Contents
Advertisement
4. Battery indication lights
The level of charge in the battery is given by five LED lights: four of these are green, the
one on the left can show either green or red, if charge is low.
The battery is almost empty if only the last red LED light is on. The battery needs to be
recharged or replaced by a (new) fully charged battery.
When the last red LED light flashes, the battery is empty and the motor will no longer
support while cycling. The integrated lighting continues to work.
Never leave the bicycle with an empty battery!
Note: charge the battery within one day.
When the motor is not used for a while, the battery switches into the sleeping mode.
This is to protect the batteries. To activate it, you can press the on/off button [A] on
the battery and the indication lights will light up. You also can connect the battery to
the charger for a few seconds or cycle the bike forwards (around 10 km/h) and push
the on/off button to activate the system.
If you push the bicycle, turn off the motor.
If your battery is equipped with a button and indicator lights, the charge-level in the
battery can be checked by pressing the button briefly. The five green lights indicate the
level of charge in your battery, the left one of these, if flashing, given the lowest level.
While charging the battery, these lights will also indicate how far the charging has
progressed.
User manual | Fun2Go and Funtrain 18.06
[A]
16
Advertisement
Table of Contents
