Table of Contents
Advertisement
1. Dismantle the cover of the holder by pressing
in the lip at the bottom of the light.
2. Replace the alkaline batteries
(1,5 V - 1500 mA) and assemble the cover.
Batteries cause environmental pollution.
Follow the local regulations during
disposal.
Couple the Funtrain
1.
Lift the handle of the trailer coupler and
place the trailer coupler over the towing
ball.
Please verify that the safety cable is
positioned around the towing ball.
2.
Hook the safety cable underneath the
bracket [A] as pictured.
3.
The trailer coupler is fitted right when the
indication indicated the "+" sign.
4.
Ensure the support wheel is folded after
connecting. Unlock the locking bolt by
pulling it out.
5.
Move the support wheel to the folded
position until you hear a 'click' when the
locking bolt locks itself again.
User manual | Fun2Go and Funtrain 18.06
1.
2.
3.
[A]
4.
1.
5.
10
Advertisement
Table of Contents
