Table of Contents
Advertisement
Reverse mode
The reverse mode is activated by pedalling backwards from a standing position. Within a
few seconds the motor is activated and the tricycle cycles at a speed of about 2 km/h
backwards (when you start to pedal backwards).
Do not be startled by an unexpected reaction from the electrical system. If you
e.g. wait for the traffic light and you play with the pedals by moving them
backwards the reverse mode is activated and the tricycle cycles backwards.
Other functions
The smart display has an automatic dimming function. With an inbuilt light sensor the
lights of the display will automatically creating less distraction for the cyclist in darker or
more shadowy conditions.
Charging the Battery
For the best performance and to prolong the life of the battery, we recommend that you
charge the battery at home at room temperature.
To charge the battery:
1. Unlock the battery by turning the key a
quarter.
2. Push down the lock while pulling the battery
with your other hand.
3. Take the battery pack inside. First connect the
charger to the plug-ensure contact of the
battery. The magnetic plug of the charger
directly connected properly to the battery.
4. Then connect the charger plug into the mains
socket. Turn the switch [A] on. A green LED
light on the charger will start to blink fast. Now
the battery will recharge.
Beware! If the battery is not connected
properly, the green LED light blinks slowly.
In case of a poor contact, the connector of
the charger needs to be cleaned.
User manual | Fun2Go and Funtrain 18.06
1.
2.
17
Advertisement
Table of Contents
