Table of Contents
Advertisement
Backup battery: (optional)
The bike can be supplied with a second battery.
When the first connected battery is empty,
switch over to the second battery.
One of the battery holders is connected to the
system, you can recognize this one because of
the cables.
Switchable battery pack: (optional)
The tricycle may be fitted with a switchable
battery pack. Once the connected battery is
empty, you can swap the battery using a switch.
This switch is located either under the seat,
below the luggage rack or below one of the two
batteries.
One of the battery holders is connected to the system, you can recognize this one because
of the cables.
If desired, you can leave the second battery to charge when you are using the other.
Keep in mind that your bike provides less support when it's cold (0ºC and less) and the
battery will discharge faster. Charging also takes more time at lower temperatures.
The action radius depends on a lot of different factors and is strongly influenced by:
capacity and voltage of the battery, degree of support that is used, temperature, wind
speed, tyre pressure, cycling speed, weight of the user and the luggage, use of gearing
etcetera.
Charging and maintenance tips for the battery
Every battery discharges automatically over time. This process is called self-discharge.
A battery that is empty and not charged, will self-discharge and will be deep
discharged. The battery can be permanently damaged during this process. In case of
deep discharge, the warranty will be void.
User manual | Fun2Go and Funtrain 18.06
19
Advertisement
Table of Contents
