Table of Contents
Advertisement
Check before every ride:
The brakes (including the parking brakes)
•
The tyre pressure (recommended: 3 bar)
•
The lights
•
That all parts are fitted properly
•
That the battery is adequately charged (depends on options)
•
Contact your dealer and stop using your tricycle as soon as you observe irregularities
during the check!
As with all mechanical parts, the tricycle is subject to wear tear and high loading. If a
component fails, it can lead to very dangerous situations. This can lead to damage or
injuries to the user of the tricycle/. Any form of cracks, scratching or change in colour in
heavily loaded parts or a component indicates that the component must be replaced.
The tricycle gives a very different ride experience than a bicycle.
If there is an electric motor on a bike: you must train with the
acceleration function and reverse functions. Be careful that the
acceleration mode or reverse mode are not unintentionally started
while using the bike. For example, at traffic lights the reverse function
can accidentally be activated and the tricycle reverses.
High speeds in the bends, driving on rough ground, and sharp bends can lead
to the tricycle falling over!
User manual | Fun2Go and Funtrain 18.06
12
Advertisement
Table of Contents
