Table of Contents
Advertisement
Foot support
When using the foot support you can fix your
foot by sliding the two straps [A] in the quick
releases [B].
The quick release can be unlocked by pulling the
lip to the rear. Now the strap can be pulled out.
You can cut the straps to size. The strap should
retain a length of at least five centimetres.
The position of the foot support on the pedal is
adjustable in length. This allows you to pedal
with the ball of your foot for better thrust.
1. Slightly loosen the four nuts with a socket
wrench.
2. Slide the plate included the foot support
forwards or backwards into the desired
position. Then tighten the nuts again.
User manual | Fun2Go and Funtrain 18.06
[B]
1.
[A]
2.
24
Advertisement
Table of Contents
