Table of Contents
Advertisement
With the option "integrated lighting", the lights will automatically switch on when you turn
on the electric motor system. You can switch the lights on and off by briefly pressing the
on/off button in this mode.
Always turn off the electrical system when you are getting off the bicycle. Turn
the electrical system on after you have taken up your riding position.
2. Degree of support 1, 2 and 3
The desired support can be set by using one of the support levels 1, 2 or 3.
1.
Light support, maximum range.
2.
Average support, average range.
3.
Maximum support, low range.
You can change the level while cycling.
3. Start assist
The Silent electric motor has a start support. This allows the driver to pull-away without
pedalling up to a speed of 6 km/h over five seconds. To accelerate, press the start assist
button and keep it pressed down. The function will only activate again, when the support
button has been pressed down again.
If you peddle normally, the function works for up to five seconds, each time the button is
pressed, up to maximum speed of the bicycle (20-25 km/h).
The start assist is used for:
Extra support when starting.
•
Extra support for cycling uphill.
•
Tip: when cycling a steep climb, you can use support in level 3 and push the start assist
repeatedly for five seconds to achieve maximum support.
User manual | Fun2Go and Funtrain 18.06
15
Advertisement
Table of Contents
