The HP lab setup
HP tested configurations
HP iPAQ Pocket PC h4100, h4300, h5400, and h5500 series
Following is a partial list of the configurations that HP has tested with the wireless iPAQ Pocket PCs.
Tested products varied in their firmware types and versions.
EAP-TLS
HP WL510 Wireless Enterprise Access Point
Microsoft Windows 2003 Server Operating System
LEAP
Cisco 1200 Series IOS and Vx-Works
Cisco Access Control Server 3.0
Microsoft Windows 2000 Server Operating System
PEAP
Cisco 1200 Series Internet Operating System (IOS)
Windows 2003 Server operating system
Performance (Throughput)
Cisco Aironet1200 Series Access Point
NetIQ Chariot Software
WEP
Cisco Aironet1200 Series Access Point with IOS firmware and Cisco Aironet 1200
Series Access Point with Vx-Works firmware
HP WL410 Wireless SMB Access Point
HP WL510 Wireless Enterprise Access Point
RoamAbout Access Point (64-bit-WEP)
Linksys, NetGear, and D-Link Systems home routers
HP WL400
WPA
Cisco Aironet1200 Series Access Point with IOS firmware
Linksys WRT54G Wireless-G Broadband Router
HP WL420 ProCurve Wireless Access Point
Troubleshooting problems
If the WLAN connection still doesn't work
Following are some troubleshooting tips to try if the WLAN connection does not work:
If the WLAN connection does not work with the chosen wireless network, try turning off the
•
WLAN Power Save modes. (See "Turning the power save features on and off" earlier in this
paper.")
The Wireless LAN and HP iPAQ Pocket PCs
45