H5400 Series With Microsoft Pocket Pc 2003 Rom Upgrade; H5500 Series - HP iPAQ H4100 series User Manual

6. On the Settings screen, tap the check-box "This network connects to the Internet" and "This
network uses a proxy server to connect to the Internet."
7. Enter the proxy server information obtained from the network administrator in the "Proxy
server:" box and tap "Advanced."
8. Make necessary changes to the settings and tap the "enter" arrow
9. Tap "OK" until the Start screen reappears.

h5400 series with Microsoft Pocket PC 2003 ROM upgrade

If an HP iPAQ Pocket PC h5400 series handheld device is connected to the ISP or private network
during synchronization, then the proper settings from the host computer will be downloaded. If the
host computer does not have the proper settings, or if the settings must be changed, then manual
setup will be required. To set up proxy server settings, perform the following steps:
1. Contact the ISP or network administrator to obtain the following:
Proxy server name
•
Server type
•
• Port
• Type of Socks protocol used, and the user name and password
2. Turn on the WLAN.
3. On the Start screen, tap Start, Settings, the Connections tab, the Connections icon, and then
the Tasks tab.
4. On the Connections screen, under "My Work Network," tap "Edit my proxy server," and
then the Proxy Settings tab.
5. Tap the "This network connects to the Internet" and "This network uses a proxy server to
connect to the Internet" checkboxes.
6. In the Proxy server box, enter the proxy server name received from the network administrator.
Tap "OK " if the port number or proxy server type settings do not require changes, and skip
step number seven.
7. If port number or proxy server type settings must be changed, then tap Advanced and make
the necessary settings changes. Tap "OK."

h5500 series

If an HP iPAQ Pocket PC h5500 series handheld device is connected to the ISP or private network
during synchronization, then the proper settings from the host computer will be downloaded. If the
host computer does not have the proper settings, or if the settings must be changed, then manual
setup will be required. To set up proxy server settings, perform the following steps:
1. Contact the ISP or network administrator to obtain the following:
Proxy server name
•
Server type
•
Port
•
Type of Socks protocol used, and the user name and password
•
2. Turn on the WLAN.
3. On the Start screen, tap Start, Settings, the Connections tab, the Connections icon, and then
the Tasks tab.
The Wireless LAN and HP iPAQ Pocket PCs
.
41