H5400 Series With Microsoft Pocket Pc 2003 Rom Upgrade; H5500 Series - HP iPAQ H4100 series User Manual

B. Tap the General tab at the bottom of the screen and then tap the "Delete Settings"
box.
C. When the Connection Manager pop-up box appears with the message "Do you want
to permanently delete these settings?" tap Yes.
4. To establish a WLAN connection using the modem connection just added or changed:
A. On the Connections screen, select the connection just created.
B. Tap the "Connect" box.

h5400 series with Microsoft Pocket PC 2003 ROM upgrade

To change the ISP settings on an HP iPAQ h5400 series with Microsoft Pocket PC 2003 ROM
upgrade handheld device, perform the following steps:
1. On the Start screen, tap Start, Settings, the Connections tab, and then the Connections icon.
2. Under "My ISP" tap "Add a new modem connection" to establish a new modem connection
or "Manage existing connections" if changes to an existing connection are desired.
A. To add a new modem connection:
I.
II.
III.
IV.
V.
VI.
VII.
VIII.
B. To change an existing connection:
I.
II.
C. To delete an existing connection:
I.
II.
D. To establish a WLAN connection using the modem connection just
added or changed:
I.
II.

h5500 series

To change the ISP settings on an HP iPAQ h5500 series handheld device, perform the following
steps:
The Wireless LAN and HP iPAQ Pocket PCs
On the "Make New Connection" screen, give the connection a name by
entering the name in the "Enter a name for the connection:" box.
Select the desired modem in the "Select a modem:" drop-down box.
Tap Next.
On the "My Connection" screen, enter the appropriate country code (1 for
the U.S.), area code, and telephone number to be dialed for the
connection; tap Next.
Type the desired user name for the connection.
Type the desired password for the connection.
Type the domain, if a domain was provided by the ISP or network
administrator.
Tap "Finish."
On the "Connections" screen, tap "Manage existing connections."
To change the connection name, tap "text," tap "Edit," and type the new
name.
On the "Connections" screen, tap "Manage existing connections."
Locate the connection in the Name box and tap the name, holding the stylus
in place for a couple of seconds until a "Delete/Connect" box appears.
Tap "Delete" to delete the connection.
On the "Connections" screen, tap "Manage existing connections."
Locate the connection in the Name box and tap the name, holding the stylus
in place for a couple of seconds until a "Delete/Connect" box appears.
Tap "Connect" to complete the connection.
33