Changing A Vpn Connection; H4100 And H4300 Series; H5400 Series With Microsoft Pocket Pc 2003 Rom Upgrade - HP iPAQ H4100 series User Manual

Changing a VPN connection

h4100 and h4300 series

Perform the following steps to make changes to VPN server connections on an HP iPAQ Pocket PC
h4100 or h4300 series handheld device:
1. Turn on the WLAN.
2. On the Start screen, tap Start, Settings, the Connections tab, the Connections icon, and then
the Tasks tab.
3. On the Connections screen, under "My Work Network," tap "Manage existing connections."
4. Tap the VPN tab.
5. Tap the desired VPN connection to change and then tap "Edit..."
6. On the My VPN screen, enter a name for the connection in the "Name:" box (for example, a
company name).
7. Still on the My VPN screen, enter the VPN server name or IP address in the "Host name/IP:"
box.
8. Next to "VPN type:" tap the authentication type desired (IPSec/L2TP or PPTP). If unsure which
option to choose then contact the network administrator.
9. Tap Next.
10. If "IPSec/L2TP" in was chosen in step 8, then tap the appropriate authentication type. If a
pre-shared key was selected, then enter the key provided by the network administrator and
then tap Next.
NOTE: If PPTP was selected in the previous screen, then skip the following step.
11. Enter the user name, password, and domain name provided by the network administrator. If
a domain name was not provided, then a connection may be made without entering one.
12. To change advanced settings, tap the Advanced button. Advanced settings should be
changed only if one of the following situations exists:
A. The server to which the connection is made does not use dynamically-assigned IP
addresses, so the TCP/IP settings must be entered.
B. The DNS or WINS settings on the server must be changed.
Tap Finish.
C.

h5400 series with Microsoft Pocket PC 2003 ROM upgrade

Perform the following steps to make changes to VPN server connections on an HP iPAQ Pocket PC
h5400 series handheld device:
1. Turn on the WLAN.
2. On the Start screen, tap Start, Settings, the Connections tab, the Connections icon, and then
the Tasks tab.
3. On the Connections screen under "My Work Network," tap "Manage existing connections."
4. Tap the VPN tab.
5. Tap the desired VPN connection to change and then tap "Edit..."
6. On the My VPN screen, enter a name for the connection in the "Name: box" (for example, a
company name).
7. Still on the My VPN screen, enter the VPN server name or IP address in the "Host name/IP:"
box.
8. Next to VPN type: tap the authentication type desired (IPSec/L2TP or PPTP). If unsure which
option to choose then contact the network administrator.
The Wireless LAN and HP iPAQ Pocket PCs 38