H5400 Series With Microsoft Pocket Pc 2003 Rom Upgrade; H5500 Series - HP iPAQ H4100 series User Manual

4. Tap the appropriate connection in the box that appears next to the network/handheld
device and beneath the text "When needed, automatically connect to Work using these
settings:"
5. Tap the "Modify..." box under the box that contains the connection just selected.
6. On the Work Settings screen, tap the "Proxy Settings" tab at the bottom of the screen.
7. Still on the Work Settings screen, tap the "This network connects to the Internet" box, tap
the "This network uses a proxy server to connect to the Internet" box, and then enter the
proxy server in the "Proxy server:" box, if appropriate.
8. Tap "Advanced". Server information will appear on the Work Settings screen.
9. Tap "OK" until the Start screen reappears.

h5400 series with Microsoft Pocket PC 2003 ROM upgrade

Servers that require an assigned IP address may also require a way to map computer names to IP
addresses. The HP iPAQ Pocket PC h5400 series handheld devices support two name resolution
options:
• DNS
WINS
•
Perform the following steps to change the server settings on HP iPAQ Pocket PC h5400 series with
Microsoft Pocket PC 2003 ROM upgrade handheld devices:
1. Contact the ISP or network administrator to:
A. Determine the correct name resolution
B. Obtain the specific server IP address
C. Determine if alternate addresses are available
NOTE: An alternate address may be enabled to establish a connection when the primary server is
unavailable.
2. Turn on the WLAN.
3. On the Start screen, tap Start, Settings, the Connections tab, and then the Connections
icon.
4. On the Connections screen, tap the Advanced tab, Network Card, and then the Network
Adapters tab.
5. In the "My network card connects to..." drop-down box, tap either "The Internet" (no
proxy server is used) or "Work" (proxy server is used).
NOTE: If connecting to the ISP at home, then tap The Internet. If connecting to a private
network such as a corporate network at work, then tap Work.
6. In the "Tap an adapter to modify settings" box, tap "iPAQ WLAN Wireless Adapter."
7. Tap the Name Servers tab and enter the appropriate information.
8. Tap "OK" to save the new settings.

h5500 series

Servers that require an assigned IP address may also require a way to map computer names to IP
addresses. The HP iPAQ Pocket PC h5400 series handheld devices support two name resolution
options:
• DNS
• WINS
The Wireless LAN and HP iPAQ Pocket PCs 30