Starting A Vpn Connection; H4100 And H4300 Series; H5400 Series With Microsoft Pocket Pc 2002 - HP iPAQ H4100 series User Manual

Starting a VPN connection

h4100 and h4300 series

If an HP iPAQ Pocket PC h4100 or h4300 series handheld device is connected to the ISP or private
network during synchronization, then the proper settings from the host computer will be downloaded.
If the host computer does not have the proper settings, or if the settings must be changed, then manual
setup will be required. To set up proxy server settings, perform the following steps:
1. Contact the ISP or network administrator to obtain the following:
• Proxy server name
• Server type
Port
•
Type of Socks protocol used, and the user name and password
•
2. Turn on the WLAN.
3. On the Start screen, tap Start, Settings, the Connections tab, the Connections icon, and then the
Tasks tab.
4. On the Connections screen under "My Work Network," tap "Edit my proxy server," and then tap
the Proxy Settings tab.
5. Tap the "This network connects to the Internet" and "This network uses a proxy server to connect
to the Internet" checkboxes.
6. In the Proxy server box, enter the proxy server name received from the network administrator. Tap
"OK" if the port number or proxy server type settings do not require changes, and skip step
number seven.
7. If port number or proxy server type settings must be changed, then tap "Advanced" and make the
necessary settings changes. Tap "OK."

h5400 series with Microsoft Pocket PC 2002

If an HP iPAQ Pocket PC h5400 series with Microsoft Pocket PC 2002 handheld device is connected
to the ISP or private network during synchronization, then the proper settings from the host computer
will be downloaded. If the host computer does not have the proper settings, or if the settings must be
changed, then manual setup will be required. To set up proxy server settings, perform the following
steps:
1. Contact the ISP or network administrator to obtain the following:
• Proxy server name
• Server type
Port
•
Type of Socks protocol used, and the user name and password
•
2. Turn on the WLAN.
3. On the Start screen, tap Start, Settings, the Connections tab at the bottom of the screen, and
then the Connections icon.
4. On the Connections screen, tap the Work Settings connection box, which appears next to the
network/handheld device icon and beneath the text, "When needed, automatically connect
to Work using these settings:"
5. Tap the "Modify..." box under the connection and then the "Proxy Settings" tab at the bottom
of the screen.
The Wireless LAN and HP iPAQ Pocket PCs 40