Set Up Your Hp Ipaq; Step 1: Remove The Battery Cover And Insert The Sim Card - HP iPAQ Product Manual

4

Set up your HP iPAQ

Follow these steps to set up and use your HP iPAQ. Carefully remove your HP iPAQ and all the
components from the box before beginning to set up your HP iPAQ.
NOTE: Do not place your HP iPAQ on a hard surface with the screen facing down. Placing the screen
on hard surface can cause scratches on the screen surface.

Step 1: Remove the battery cover and insert the SIM card

1. Press the back cover release latch (1), and then pull the back cover (2) from your HP iPAQ as
shown in the figure.
(1)
(2)
Step 1: Remove the battery cover and insert the SIM card 7