Note:
use as it contains the product key for installing Microsoft
Outlook. You will need this product key if you ever need to
reinstall Outlook 2002.
How Do I Power On My HP iPAQ for
Initial Use?
Note:
To power on the HP iPAQ for the first time:
1. Insert the round connector on the AC Adapter cable into the
connector on the sync cable.
2. Insert the connector on the sync cable into the connector on
the bottom of the HP iPAQ.
3. Connect the AC Adapter into a standard electrical outlet to
charge the battery.
Do not connect the HP iPAQ to your computer until you have
installed ActiveSync on your computer.
It is recommended that you save the CD sleeve for future
The Power button is disabled until the device is activated.
2