H5500 Series - HP iPAQ H4100 series User Manual

VPN server are not known, then contact the network administrator. Perform the following steps to set
up a VPN server connection:
NOTE: At this point, one may use the New Connection wizard to set up a VPN connection, or
continue with the steps below. The New Connection wizard provides online help and is available at
any time in the VPN server connection setup by tapping the keyboard question mark (?).
1. Turn on the WLAN.
2. On the Start screen, tap Start, Settings, the Connections tab, Connections, and the Tasks tab.
3. Under "My Work Network", tap "Add a new VPN server connection."
4. On the "Make New Connection" screen, enter a name for the connection in the "Name:"
box. Enter the appropriate information provided by the network administrator in the "Host
name/IP:" box.
5. Tap the appropriate VPN type received from the network administrator and then tap Next.
6. On the "My VPN" screen, tap either "A certificate on this device" or "A pre-shared key." If a
pre-shared key was tapped, enter the key number in the box.
7. On the My VPN screen, enter a user name, password, and domain provided by the network
administrator.
8. Tap Finish.
9. Follow the instructions in the New Connection wizard.
NOTE: For online Help for any screen in the New Connection wizard or while changing settings,
tap the question mark (?).

h5500 series

A VPN connection provides a secure connection to servers, such as a corporate network, via the
Internet. If the name, password, domain name, TCP/IP settings, and host name or IP address of the
VPN server are not known, then contact the network administrator. Perform the following steps to set
up a VPN server connection:
NOTE: At this point, one may use the New Connection wizard to set up a VPN connection, or
continue with the steps below. The New Connection wizard provides online help and is available at
any time in the VPN server connection setup by tapping the keyboard question mark (?).
1. Turn on the WLAN.
2. On the Start screen, tap Start, Settings, the Connections tab, Connections, and the Tasks tab.
3. Under "My Work Network," tap "Add a new VPN server connection."
4. On the "Make New Connection" screen, enter a name for the connection in the "Name:"
box. Enter the appropriate information provided by the network administrator in the "Host
name/IP:" box.
5. Tap the appropriate VPN type received from the network administrator and then tap Next.
6. On the My VPN screen, tap either "A certificate on this device" or "A pre-shared key." If a
pre-shared key was tapped, enter the key number in the box.
7. On the My VPN screen, enter a user name, password, and domain provided by the network
administrator.
8. Tap Finish.
9. Follow the instructions in the New Connection wizard.
NOTE: For online Help for any screen in the New Connection wizard or while changing settings,
tap the question mark (?).Changing a VPN connection
The Wireless LAN and HP iPAQ Pocket PCs 37