H5500 Series - HP iPAQ H4100 series User Manual

Wireless lan and hp ipaq pocket pcs
Hide thumbs Also See for iPAQ H4100 series:
Table of Contents

Advertisement

Figure 1.1 shows the Network indicator pop-up box.
Figure 1.1: Network indicator
2. In the same pop-up box under "This network connects me to:" tap the Internet button (if the
network connects to the Internet without using proxy settings) or the Work button (if the
network uses proxy settings). If doubt exists about the whether the network uses proxy
settings, then contact the system administrator. For additional information, see the section in
this document entitled "Setting up the proxy server."
3. If the display prompts for a Network key (WEP), then enter the key and tap Connect. (If there
are any questions about the Network key, then contact the network administrator.)

h5500 series

Perform the following steps to connect to a WLAN network:
If at least one network is present on the Pocket PC, then the Network indicator icon ( ) will appear in
the Start bar. Tap the icon; when the "Multiple Networks Indicated" pop-up box appears, tap the
desired network.
NOTE: A network can be set up manually, if desired. See "Manually entering new network settings"
in the next
section.
Figure 1.1 shows the Network indicator pop-up box.
Figure 1.1: Network indicator
The Wireless LAN and HP iPAQ Pocket PCs
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipaq h5400 seriesIpaq h4300 seriesIpaq h5500 series

Table of Contents