View System Information - LG PCS400R Pro:Centric Installation & Setup Manual

View System Information

1 Log in to the PCS400R as described on the previous page.
2 At the Command > prompt, type info and press Enter.
The System Information display identifies important information about the PCS400R, including the unit serial number, hardware ID (firmware
version), software versions, MAC addresses, and IP addresses, for example:
PCS400R Pro:Centric Server v1.2.1
Copyright (c) 2017 LG Electronics U.S.A., Inc.
SN:
Hardware ID:
FPGA version:
BIOS version:
BIOS vendor:
CPU SN:
OS version:
OS release:
Ctrl MAC:
Ctrl IP:
Feat MAC:
Feat IP:
VPN IP:
RF config:
RF channel:
Channels:
Local time:
* Note : If RF output is configured for DVB-C modulation, the display will identify the RF frequency (in KHz) in place of the RF channel. If IP
output is configured, the display will identify the multicast IP address in place of the RF fields.
It is recommended that you record this information for future reference. If you find it necessary to call customer service or engineering support,
please have this information available.
601-12480013
1
802
116
PCS400v2
000002703544
Linux 3.10.0-327.e17.x86_64
#1 SMP Thu Nov 19 22:10:57 UTC 2015
00:13:95:21:a2:7d
10.1.2.3
00:0C:63:40:47:db
192.168.20.120
n/a
Mode 3, 256-QAM-B, RF: 6 MHz, 5.36 MSps, ASI: 38.81 Mbps
75
1
Tue Apr 25 14:42:02 EDT 2017
23