Video Channel Assignments For Ip Output; Asi Output (Optional) - LG PCS400R Pro:Centric Installation & Setup Manual

Video Channel Assignments for IP Output

Each IP stream is limited to 19.4 Mbps.
• The PCS400R outputs IPv4 multicast streams. Ensure the institution's IP network and room receivers support IPv4 multicast and that the
network is capable of selectively routing multicast traffic. Refer to vendor equipment documentation for further information.
• Create a channel assignment plan for the installation site, or modify an existing plan to incorporate the IP output of the PCS400R. Ensure that
up to 23 unused and unreserved IPv4 multicast addresses, within the designated range 224.0.0.0 to 239.255.255.255, are allocated for the
PCS400R IP output.
The IP start channel is user-assigned in the Admin Client, and the remaining channel assignments are then automatically incremented. For
example, if the IP start channel assignment is 227.0.0.40, the remaining channels will be 227.0.0.41, 227.0.0.42, etc. Since the first two streams
are reserved for site data, the first video content channel in this scenario will be 227.0.0.42.
• Reserve one User Datagram Protocol (UDP) port for the multicast data streams. You can use the system default (1234) or another unassigned
port number, for example, 50,000, 50,001, etc. The port must avoid conflict with other protocols in use.
* Note: Refer to the IANA IPv4 Multicast Address Space Registry and/or the IANA Service Name and Transport Protocol Port Number Registry
for further IP address/port information as required.

ASI Output (Optional)

ASI output supports up to 19.4 Mbps each for GEM and site data (total of 38.8 Mbps).
• If the system is using ASI output, install the modulator and upconverter that will receive the ASI output signal from the PCS400R. Refer to the
manufacturer's documentation.
9