Pcs400R Communication - LG PCS400R Pro:Centric Installation & Setup Manual

PCS400R Communication

If you are unable to establish remote communication with the PCS400R, refer to the following flow chart.
Cannot Communicate with PCS400R
Check that the proper IP address for the
PCS400R is being targeted. If necessary, adjust
and then reattempt communication.
Problem solved?
Ensure your PC's IP address is on the same
subnet as the PCS400R's IP address.
If necessary, adjust and then reattempt
communication.
Problem solved?
Contact LG.
36
Yes
No
* Note : For example, if the PCS400R is configured with IP address:
192.168.1.x and Network mask: 255.255.255.0, the PC's IP
address cannot be: 192.168.2.x.
Yes
No
To verify the PCS400R IP address:
• If DHCP is enabled, check the router for DHCP IP address
assignments to determine whether the proper IP address is being
used to communicate with the PCS400R.
• If DHCP is not enabled, connect a PC to the PCS400R Service Port,
display the System Information, and ensure the IP address shown
in the Ctrl IP field is the IP address being used to communicate
with the PCS400R. If necessary, update the Control Port
configuration as described in this document.
End
End