View System Information; Configure Network Settings - LG PCS200R Pro:Centric Installation And Setup Gude

PCS200R Configuration Options (Cont.)

View System Information

1. Log in to the PCS200R as described on the previous page.
2. At the Command > prompt, type info and press Enter.
The System Information display identifies important information about the PCS200R, including
the unit serial number, hardware ID (firmware version), software versions, MAC addresses, and
IP addresses, for example:
PCS200R Pro:Centric Server v7.4
Copyright (c) 2010 - 2015 Zenith Electronics LLC
SN: 201-12301011
Hardware ID: 2
OS version: Linux 3.4.0-zenith-pcs200+
OS release: #121 SMP Mon Dec 8 10:38:49 CST 2014
Ctrl MAC: 00:0C:63:40:36:14
Ctrl IP: 10.1.2.3
Feat MAC: 00:0C:63:40:36:15
Feat IP: n/a
VPN IP: n/a
RF config: Mode 3, 256-QAM-B, RF: 6 MHz, 5.36 MSps, ASI: 38.81 Mbps
RF channel: 75
Channels: 1
Local time: Mon Jan 19 14:42:02 EST 2015
Note: If RF output is configured for DVB-C modulation, the display will identify the RF
frequency (in KHz) in place of the RF channel.
It is recommended that you record this information for future reference. If you find it
necessary to call customer service or engineering support, please have this information
available.

Configure Network Settings

This option enables you to configure the network settings of the PCS200R Ethernet ports.
The Control Port is used for remote communication purposes, while the Feature Port is
designated for PCS200R IP output.
1. Log in to the PCS200R as described on the previous page.
2. At the Command > prompt, type setip and press Enter.
The system displays an overview of the current network configuration followed by the
Network Configuration Menu, for example:
22
(Continued on next page)
206-4227