Modify Network Settings - LG PCS400R Pro:Centric Installation & Setup Manual

Modify Network Settings

This section describes how to modify the network settings of the PCS400R Ethernet ports. The Control Port is used for remote management/
communication purposes, while the Feature Port is designated for PCS400R IP output.
1 Log in to the PCS400R as described on the previous page.
2 At the Command > prompt, type setip and press Enter.
The system will display the Network Manager menu.
3 Select/highlight Edit a connection and press Enter to modify the IP configuration of either the Control Port or the Feature Port.
* Note : To exit the Network Manager and return to the Main Menu prompt without modifying any settings, select Quit.
* Note : You may also modify the server's host name from the Network Manager. See "Modify the Server Host Name" on pages 27 to 28
for further information.
4 In the next screen, select/highlight the port profile to modify, and then press Enter.
24