Log In To The Pcs400R And Access The Main Menu - LG PCS400R Pro:Centric Installation & Setup Manual

Log In to the PCS400R and Access the Main Menu

* Note : The PCS400R must be connected to an IP network for SSH client access. For direct access to the PCS400R Service Port, use the FTDI
TTL-USB cable (P/N TTL-232R-5V-AJ). See also "Network and Communication Setup" above for further information.
1 Establish communication with the PCS400R using an SSH client or via a direct connection to the PCS400R Service Port.
Once communication is established, you should see a login prompt. (If the login prompt is not automatically displayed, press Enter to refresh the
screen.)
2 At the login as: prompt, type admin and press Enter.
3 At the Password: prompt, type the admin password and press Enter.
4 At the Command > prompt, either:
• Press Enter to display the PCS400R Main Menu (See example below).
• Type the desired command and press Enter.
The following sections describe each of the configuration commands.
* Note: You can always press Enter at the Command > prompt to display the PCS400R Main Menu.
Example: PCS400R Main Menu
System information
info
setip TCP/IP Setup Menu
tz Timezone setup
time Time setup
pwd Change password
portal Select the portal application
monitor System monitor
shut Shutdown the system
reset System Reset
exit End the session
Command >
22
Main Menu