LG PCS400R Pro:Centric Installation & Setup Manual page 4

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
• If water or another substance enters the product (like a AC adapter, power cord, TV), disconnect the power cord and contact the
service centre immediately. Otherwise, this may result in fire or electric shock.
• Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction or product deformation.
• Never Disassemble the AC adapter or power cord. This may result in fire or electric shock.
• Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the adapter.
• Power Sources
- This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the
type of power supply to your INSTALLATION, consult your product dealer or local power company.
• Overloading
- Do not overload wall power outlets and extension cords as this can result in a risk of fire or electric shock.
• Disconnect Device
- The AC mains plug is used as the disconnect device. The disconnect device must remain readily operable.
• Object and Liquid Entry
- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not use liquid cleaners or aerosol
cleaners.
• Outdoor Use
- To prevent fire or shock hazards, do not expose this product to rain or moisture.
• Wet Location
- Do not use this product near water or moisture or in an area, such as a basement, that might become flooded. The apparatus
shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Test Equipment
- In some cases, LG has supplied or recommended the use of test equipment and devices for the setup and testing of the
equipment. The operation and maintenance of test equipment is described in their associated instruction manuals. Please refer
to these manuals for explicit instructions regarding the safe use and handling of the equipment.
• Damage Requiring Service
Unplug this product from the wall power outlet and refer servicing to qualified service personnel under the following conditions:
- If the power-supply cord or plug is damaged.
- If liquid has been spilled, or objects have fallen into the product.
- If the product has been exposed to rain or water.
- If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by
the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to its normal operation.
- If the product has been dropped or the cabinet has been damaged.
- If the product exhibits a distinct change in performance.
Refer all servicing to qualified service personnel.
• Servicing
- These servicing instructions are for use by qualified service personnel only. To reduce the risk of electrical shock, do not perform
any servicing other than that described in the operating instructions unless you are qualified to do so.
• Replacement Parts
- When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or
that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other
hazards.
4