Table of Contents
Advertisement
Creating default module selection
62 •
In order to create an in-house default module selection, proceed as outlined
below.
1. Press the
switch menu
The secondary menu is displayed.
2. Press the
button.
settings
The
menu appears.
User
3. Press the drop-down menu.
The drop-down menu opens.
4. Press the
Default module selection
The current module selection is displayed.
The
Raw data for impedance
tory. Activation/deactivation of the
evaluation modules affects bioimpedance analysis as outlined
Health risk
in the table below.
Setting
Evaluation
• = activated,
module
= deactivated
-
•
Energy
-
•
Health risk
-
-
Raw data for
impedance
•
a.Interrogation of PAL and WC in the Module-specific entries dialog window.
Dialog window is skipped if the Energy
are deactivated.
5. Press all modules you wish to deactivate.
The tick in the checkbox is no longer displayed.
NOTE:
Press on a module again to reactivate it.
button.
menu element.
evaluation module is deactivated at the fac-
Raw data for impedance
Effect
Physical activity level (PAL) is interrogated
No interrogation of physical activity level
(PAL)
Waist circumference (WC) is interrogated
No interrogation of waist circumference
(WC)
Measurement duration: 20 seconds
Measurement duration: 90 seconds
Raw data for impedance available for
19 frequencies
and
Health risk evaluation modules
,
and
Energy
a
Advertisement
Table of Contents
