Table of Contents
Advertisement
Activating/deactivating pre-tare
Entering height manually
Transmitting height via seca 360°
wireless network
If you wish to have a permanently-saved additional weight automatically sub-
function
tracted from the measurement result during the current weighing procedure,
proceed as outlined below.
1. Switch on the device.
2. Ask the patient to position themselves on the device.
3. Press the
The numerical keypad appears.
The last additional weight saved is displayed.
4. Press the Enter key on the numerical keypad.
The entry is accepted.
The message "PT" appears on the display
The displayed value is automatically subtracted from the measurement
result.
The numerical keypad is no longer displayed.
5. Read off the measured result.
6. To deactivate the
The additional weight is added to the measured result once more.
To enter height manually, to determine BMI for example, proceed as outlined
below.
1. Ensure that the
2. Press the
The numerical keypad appears.
3. Enter the patient's height.
4. Press the Enter key on the numerical keypad.
The entry is accepted.
If the device is connected to a
transmit height, for determining BMI for example, to the
wireless network. To do so, proceed as outlined below.
seca 360°
1. Ensure that there is a
The wireless symbol for the length measuring device is shown in white.
NOTE:
If you are uncertain of whether there is a
connection, contact your administrator or hospital technician.
2. Switch on the length measuring device.
3. Perform the height measurement.
4. Ensure that the
the
seca 515/514
5. Press the
The measured value appears in the height field.
button.
pre-tare
function, press the
pre-tare
tab is active.
weight/height
field.
height
seca 360°
wireless connection.
seca 360°
tab is active in the touchscreen display of
weight/height
.
button on the length measuring device.
send/print
button again.
pre-tare
length measuring device, you can
seca 515/514
wireless
seca 360°
Operation • 29
English
via the
Advertisement
Table of Contents
