Table of Contents
Advertisement
Printing
seca 115
Printer
print
Indirect connection via USB
memory stick
If the device is connected to the
use the specific printing function of the PC software and print out detailed
results reports on a PC printer.
You can start printing a results report directly from the Medical Body Compo-
sition Analyzer (see "Printing results report" on page 44). The data are trans-
mitted to the
PC software and automatically passed on to the
seca 115
connected PC printer.
NOTE:
• Analysis results are
the
PC software for printing. To prevent data loss, follow
seca 115
the information in the section entitled "Saving the measured results"
on page 43.
• Follow the instructions for use for doctors and assistants for the
PC software. If you have any queries regarding data
seca 115
connections, contact your administrator.
If the device is not to be directly integrated in a PC network, you can create
seca patient files and save measurements on the seca USB memory stick
supplied.
The seca USB memory stick is supplied initialized, meaning it contains a seca
patient database and is secured with an initial USB PIN (0000).
If you wish to use additional USB memory sticks (seca original accessories
recommended), these must also be initialized before seca patient files can be
saved on them. Contact your administrator for this.
You can synchronize the seca patient database on the USB memory stick
with the seca patient database of the
NOTE:
• Information on creating and saving seca patient files can be found in
the section entitled "Assigning a measurement to a patient file" from
page 36.
• Follow the instructions for use for doctors and assistants for the
PC software. If you have any queries regarding data con-
seca 115
nections, contact your administrator.
PC software via Ethernet, you can
seca 115
saved automatically if they are transmitted to
not
PC software.
seca 115
Before you really get started ... • 21
English
Advertisement
Table of Contents
