Main Menu : Initialize - Saftronics CIMR-VG5U Installation & Quick Start Manual

The VG5 ships preset to open loop vector control, quick-start access level. Included in this sec-
tion are descriptions of the Quick-Start parameters, for simplified operation of this drive.
Main Menu: Initialize <ENTER>
3.1
A1-00 Language Selection
The standard VG5 software incorporates seven display languages. Select the language dis-
played on the digital operator according to the following table:
A1-01 Parameter Access Level
This parameter determines the group of parameters that can be accessed during set-up/programming.
There are five access levels ranging from parameters for viewing only (0: Operation Only), to parame-
ters required for advanced applications (4: Advanced Level). The inverter defaults to a setting of
"2: Quick Start" to aid in simplifying set-up. See the following table:
Setting
0
1
2
3
4
A1-02 Control Method Selection
Select the control method best suited for your application.
Setting
0
1
2
3
VG5 Installation & Quick-Start Manual
Setting
English (factory default)
0
1 Japanese
2 German <1110>
3 French <1110>
4 Italian <1110>
5 Spanish <1110>
6 Portuguese
Operation Only
User Program - Accesses parameters selected by OEM.
Quick Start Level (factory default) - For maintenance-level programming.
Basic Level - For basic programming in most applications.
Advanced Level - For advanced programming in special applications.
V/f Control - For general-purpose and multiple motor applications.
V/f with PG Feedback - For general-purpose applications requiring closed loop
speed control.
Open Loop Vector (factory default) - For applications requiring open loop speed
control, higher torque at low speeds (150% torque below 1Hz).
Flux Vector - For applications requiring precise speed and torque control, includ-
ing zero speed control. Uses encoder feedback.
Chapter 3 - Quick-Start Programming
Control
Select Language
Description
Control
Access Level
Description
Control
Control Method
Description
Initialize Menu
V/f V/f Open Loop Flux
w/ PG Vector Vector
   
V/f V/f Open Loop Flux
w/ PG Vector Vector
   
V/f V/f Open Loop Flux
w/ PG Vector Vector
   
47