Main Menu : Programming - Saftronics CIMR-VG5U Installation & Quick Start Manual

Chapter 3 - Quick-Start Programming
Programming Menu
A1-03 Operator Status
Use this parameter to re-initialize the inverter to its factory default settings. It is also possible to re-ini-
tialize the inverter to settings as determined by the user. See the VG5 Programming Manual for further
details on the user initialization.
Setting
A1-04 Password Entry
This parameter allows the password lock-out of users from prohibited parameters. This parameter is
used in conjunction with Function A2, the user parameters group. When the "user program" access
level is selected and the programming is locked via the A1-04 password, only those parameters in
group A1 and A2 can be accessed. All other parameters cannot be viewed.
Main Menu: Programming <ENTER>
B1-01 Frequency Reference Selection
B1-02 Operation Method Selection
B1-01 and B1-02 determine how the inverter is to receive a frequency reference and a start/stop com-
mand, respectively. Frequency reference and run command can be set independently as shown below:
Setting
By depressing the LOCAL/REMOTE key on the digital operator, the operation mode can be
selected as shown below:
Local:
Remote: Operation according to frequency reference and run command set by B1-01 & B1-02.
The digital operator is reset to remote operation when power is cycled.
48
No Initialization (factory default)
0
1110 User Initialization
2220 2-Wire Initialization
3330 3-Wire Initialization
0 Command from digital operator
Command from control circuit terminal (factory default)
1
2 Command from serial communication
3 Command from option card
4 Engineering Workstation (EWS) - For use with CP-717 <1110>
Operation according to frequency reference and run command from digital operator.
Init Parameters
Description
Enter Password
Reference Source
Run Source
Description
VG5 Installation & Quick-Start Manual
V/f V/f Open Loop Flux
Control w/ PG Vector Vector
   
V/f V/f Open Loop Flux
Control w/ PG Vector Vector
   
V/f V/f Open Loop Flux
Control w/ PG Vector Vector
   
   