Planet Networking & Communication IMG-120T User Manual page 53

setting the ID range and ID offset. Only the channel type in the slave mode of the channel can be set up, including
the Slave ASCII, Slave RTU and Slave TCP. Virtual ID + ID Offset = Real ID (Actual ID).
This function allows setting the value for slave ID configuration. Press the "Add" and "Submit" buttons to set the
value as shown in Figure 4-7.
The page includes the following fields:
Slave ID Map Table
Channel No.
Channel Type
Channel Definition
Slave ID Range
(Virtual~~~Real)
Figure 4-7: Slave ID Screen
Display the channel number.
This parameter is to choose RTU Master/RTU Slave/ASCII Master/ASCII
Slave operation modes; the default mode is RTU Slave.
Display the channel definition information.
Display the Slave ID Range information.
-53-
User's Manual of IMG-120T