Planet Networking & Communication IMG-120T User Manual page 55

User's Manual of IMG-120T
Figure 4-9: Slave ID Parameters Screen
Figure 4-10: Slave ID-RTU Master Screen
The IP address of the TCP is 192.168.0.188 (For example, the IP address of the local PC), the TCP port number
is 6000, and the virtual ID is 3~4. Offset is 2.
RTU Slave Mode
This function allows the users to use Modbus TCP master device and Modbus RTU device to achieve
communication. The operation mode of the Industrial Modbus Gateway is set to RTU Slave.
Step 1: Choose "RTU Slave" in Channel Type.
Step 2: Press the "Modify" button to input the setting parameters.
Step 3: After setup is completed, press the "Affirm" button to take effect.
-55-