Planet Networking & Communication IMG-120T User Manual page 44


State Monitoring

Access Control

System
Management
Slave ID: configure Slave ID Map Table parameters.
Display the serial port communication traffic counters in transmit and receive.
Configure access control parameters as shown below:
Device Security: allow disable or enable Web Console, Telnet Console,
Device Search, Firmware Upgrade function.
IP Filtering: set up the IP address filtering function.
MAC Filtering: set up the MAC address filtering function.
User Management: allow to modify the username and password or disable
authentication function. 3 sets of username and password can be configured.
Configure system management parameters as shown below:
System Information: display the system information of Industrial Modbus
Gateway.
System File: provide factory default configuration; download and upload
Configuration file from Local PC and Upgrade Firmware from Local PC.
Logout & Reboot: provide system logout and system reboot.
-44-
User's Manual of IMG-120T