Chapter 6. Command Line Mode - Planet Networking & Communication IMG-120T User Manual

The CLI groups all the commands in appropriate modes according to the nature of the command. A sample of the
CLI command modes are described below. Each of the command modes supports specific software commands.
After logging in and accessing the Industrial Modbus Gateway Telnet interface, please enter "?" or "help" under
Industrial Modbus Gateway Telnet interface where it displays a list of the available commands and descriptions of
the commands. The telnet commands list screen appears as Figure 6-1 shows.
The page includes the following configurable data:
List
Help
Quit
Exit
Reboot

CHAPTER 6. COMMAND LINE MODE

Figure 6-1: Telnet Help Screen of Industrial Modbus Gateway
List command name under Telnet interface.
List command name and help information under Telnet interface.
This command will log out Telnet interface.
This command will exit the current mode and back to the initial mode.
This command will reboot the Industrial Modbus Gateway.
-69-
User's Manual of IMG-120T