Planet Networking & Communication IMG-120T User Manual page 24

1. This utility shows all necessary information from the devices, such as MAC address, device name, firmware
version and device IP subnet address. It can also assign a new password, IP subnet address and description
for the devices.
2. After the setup is completed, press the "Update Device", "Update Multi" or "Update All" button to take
effect. The functions of the 3 buttons above are shown below:

Update Device: Use the current setting on one single device.

Update Multi: Use the current setting on multi-devices.

Update All: Use the current setting on all the devices in the list.
The same functions mentioned above also can be found in the "Option" tool bar.
3. By clicking the "Control Packet Force Broadcast" function, it allows you to assign a new setting value to
the Web Smart Switch under a different IP subnet address.
4. Press the "Connect to Device" button and input the username and password in the web login screen, and
the web main screen appears in Figure 3-5.
5. Press the "Exit" button to shut down the Planet Smart Discovery Utility.
Figure 3-10: Planet Smart Discovery Utility Screen
-24-
User's Manual of IMG-120T