4.4 Serial Settings
This function provides serial port COM settings and displays the serial port COM information.
4.4.1 COM Settings
This function allows setting the value for serial port COM configuration. Press the "Submit" button to set the
value as shown in Figure 4-4.
The page includes the following configurable data:
Port Setting
• Port
Settings
• Alias
• Baud Rate
• Data Bits
• Stop Bits
• Parity Bits
Figure 4-4: Serial Settings -- COM Settings Screen
Display the COM1 information.
Manually input the description of serial port; the available range is 30
characters.
It is a parameter to check the communication speed. It shows to transfer how
many bits in 1 second. The available options are shown below:
300/600/1200/2400/4800/9600/19200/38400/57600/115200.
It is a parameter to check the actual data bits in communication; when PC
sends a packet, actual data is not 8 bits; the standards are 7 bits and 8 bits.
The last bit of the single packet -- the typical values are 1 bit and 2 bits.
It is a simple method to check out fault in serial communication; it has 4 types:
-48-
User's Manual of IMG-120T