Planet Networking & Communication IMG-120T User Manual page 54

Operate
Press to access the following parameters screen.
The page includes the following fields:
Remote IP Address
TCP Port
Slave ID Start
Slave ID End
Slave ID Offset
Buttons
: Click to apply changes.
: Click to apply changes.
: Click to delete setting.
: Click to modify setting.
RTU Master Mode
This function allows the users to use Modbus RTU master device and Modbus TCP device to achieve
communication. The operation mode of the Industrial Modbus Gateway is set to RTU Master.
Step 1: Choose "RTU Master" in Channel Type.
Step 2: Press the "Add" button to input the setting parameters.
Step 3: After setup is completed, press the "Affirm" button to take effect.
Provide Delete and Modify button.
Figure 4-8: Slave ID Parameters Screen
Allow input the remote IP address.
This parameter is to input the TCP port and available range is 1-65535.
This parameter is to input the start Slave ID and available range is 0-247.
This parameter is to input the end Slave ID and available range is 0-247.
This parameter is to input the offset Slave ID and available range is -253-253.
-54-
User's Manual of IMG-120T