Powering Down The System; Hard Shutdown; Restore From Injector Shutdown; Restore From System Shutdown - Bayer HealthCare Medrad MRXperion Operating Manual

8 - 28

8.2 Powering Down the System

The system provides three options for powering down the system: Full System Shutdown, Injector Shutdown, and System
Restart.
1.
From the Launch menu, select Shutdown, and then select a shutdown option or press the power button on the Pod.
2.
Select from the following shutdown options:
System Shutdown: Both the display and the injector shutdown. The Pod LED illuminates continuous amber.
Q
Injector Shutdown: The injector shuts down, the display screen is blank, and Informatics operations remain
Q
running on the display. The Pod LED blinks green.
System Restart: Both the display and the injector restart.
Q

8.2.1 Hard Shutdown

To perform a hard shutdown, press and hold the power button on the Pod for at least 7 seconds. The injector and display
shut down and the Pod LED flashes green.

8.3 Restore from Injector Shutdown

1.
While the Pod LED blinks green, press the power button on the Pod.
2.
The Pod LED will illuminate continuous green, the injector powers up, and the display screen becomes active.
3.
Read the warning on the Safety screen, then press Continue. The Home Screen displays.

8.4 Restore from System Shutdown

1.
While the Pod LED is illuminates continuous amber, press the power button on the Pod.
2.
The Pod LED will illuminate continuous green, the injector powers up, and the display screen becomes active.
NOTE: Take care not to interrupt the restore cycle described in
power button while restoring from Injector Shutdown or System Shutdown, an error may be generated on
the injector or the display.
Figure 8 - 2: Power Down Options
"8.3"
MEDRAD® MRXperion
and "8.4". If you inadvertently press the Pod