Bayer HealthCare Medrad MRXperion Operating Manual page 74

15 - 68
3.
Edit information for each of the following items by selecting a tab (2) on the left of the screen and entering the
parameters:
Contrast Name: Select an existing contrast name from the list (3) or add a new contrast name by selecting Add
Q
New (4) and entering the name of the contrast using the keyboard window that will appear on the display.
Select Enter to save the new contrast name to the list. Select the contrast name from the list.
Concentration: Select an existing concentration from the list (3) or add a new concentration by selecting Add
Q
New (4) and entering the concentration (5). Select Enter (6) to save the new concentration to the list. Select the
concentration from the list.
Vial Size: Select an existing vial size from the list (3) or add a new vial size by selecting Add New (4) and enter-
Q
ing the vial size (5). Select Enter (6) to save the new vial size to the list. Select the vial size from the list.
Dosage: Select an existing dosage from the list (3) or add a new dosage by selecting Add New (4) and entering
Q
the dosage (5). Select Enter (6) to save the new dosage to the list. Select the dosage from the list.
NOTE: A saved value can be deleted from the list by pressing the X button. Select Yes in the message window to
confirm deletion. Deleting a value will also delete any saved contrast types using that value.
4.
Once the contrast name, concentration, vial size, and dosage have been selected, a Save (7) button will appear at
the top of the screen. Review the selections in the header and select Save to save the Contrast Type. Select Yes on
the message window to confirm.
5.
Select OK to save all changes and exit Contrast Configuration.
Figure 15 - 12: Adding a New Contrast Type
MEDRAD® MRXperion