Installation | Focus And Zoom Adjustment - ADJ PINPOINT GOBO COLOR User Manual

I N S T A L L A T I O N
There are two possible installation methods for this unit.
X-Clip Method: The unit includes an X-Clip to allow installation from drop down ceilings. Always
ensure that the unit is firmly fixed to avoid vibration and slipping during operation. Always ensure
that the structure to which you are attaching the unit is secure and capable of supporting at least 10
times the unit's weight. Always use a safety cable that can hold 12 times the unit's weight when doing
installing the unit in a suspended environment. The safety cable should go through the eye hole nut
that holds the X-Clip base in place.
Magnetic Base Method: The unit's magantic base can also be used for installation to magnetic sur-
faces. Remove the X-Clip base by unscrewing the eye hole bolt. The unit can now be stuck to any
magnetic surface.
Regardless of the chosen installation method, the equipment must be installed by a professional, and
it must be installed in a place where it is out of the reach of the general public.
F O C U S A N D Z O O M A D J U S T M E N T
The knobs located on the right side of unit are used to adjust the focus and the zoom. For a tighter/
narrow beam move the first/front knob to the front of the fixture, and move the second knob to rear.
For a wider beam, move the first/front knob towards the middle of the fixture, and move the second
knob towards the middle as well. Adjust as required.
11