Dmx Operation; Beam Angle Adjustment - ADJ PAR Z100 5K User Instructions

DMX OPERATION

Universal DMX Control: This function allows you to use a universal DMX-512 controller to control the
dimmer, fine dimmer and strobe effect. A DMX controller allows you to create unique programs tailored to your
individual needs.
1. The Par Z100 5K has 4 DMX channel modes; 1 channel mode, 2 channel mode, 3 channel mode, and 4
channel mode. See page 12 for a detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures on pages 6-7 as well as the set-up
specifications that are included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 9 to select your DMX channel mode and set your desired DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
7. For help operating in DMX mode consult the manual included with your DMX controller.

BEAM ANGLE ADJUSTMENT

To adjust the beam angle slide the beam angle adjuster located inside/in front of the lens. See diagram below.
The beam angle can be adjusted manually, between 9°/ 15°/ 20°/25°/ 30°.
A.D.J. Supply Europe B.V. – www.adj.eu – Par Z100 5K Instruction Manual Page 11